Select Page

A natural swimming pool can be designed to look like a classic in-ground pool, or it can be designed to fit in with nature and mimic a pond or lake. The biggest difference in design is with the filtration. A natural swimming pool uses plants to filter the water. Some designs will have a rim of aquatic plants; other designs have a separate plant pond that is linked to the main body of water. You can also hire a pool builder in Orange County via https://www.bluefountainpools.net/.

The bottom of a natural pool is lined. Some people think that a natural pool is just a hole in the ground. This is not the case. The pool will be lined with natural sand, bentonite clay, or else a plastic liner. There are new eco-friendly plastics that many people use. A layer of the gravel needs to be placed at strategic locations to ensure that fresh water is kept in the swimming area.

The plant section needs to be about the same size as the swimming area. The plants will not float into the swimming area. Plants will be anchored either on the edge of the pool or in an adjacent pond. The plant pond must be linked with the main swimming area. A barrier will be placed between the plant section and the swimming section. This is to make sure that the plants do not move into the swimming location.

A pump will be installed to make sure that water is flowing at all times. The water needs to flow from the swimming section and into the plant section so that it can be cleaned. That pump can either be electric or solar.